I can vouch for this seller, he is super awesome! You will 100% be satisfied!

Lumenier QAV-S Mini 3" Freestyle

Lumenier 3" QAV-S chamfered & assembled with dampening grease.

iFlight Succex Mini F7, MPU6000 version. 8K/8K.

iFlight Succex Mini 35A BLHeli-S ESC, Bluejay firmware. Bi-Dir dshot running.

RCinPower 1506 4300 KV Motors (Brand New).

Speedybee 800 mw VTX / Foxeer RHCP antenna.

Happymodel DiamondF4 ELRS AIO 5-IN-1 Flight controller built-in OPENVTX ESC OSD Receiver

Sensor: MPU-6000 or ICM20689 or BMI270(SPI connection)

Power supply: 1S battery input (DC 2.9V-4.35V)

Power supply: 1S LiPo/LiPo HVCurrent: 5A continuous peak 6A (3 seconds)

Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready

Packet Rate option: 50Hz/150Hz/250Hz/500Hz

Compatible with ExpressLRS V2.0 TX Module

Couldn’t flash separately ExpressLRS firmware

HDZero Mobula6 BNF - 1s HDZero Whoop Lite

HDZero Mobula6 BNF - 1s HDZero Whoop Lite - ELRS version

Specifications:
Frame wheelbase: 65mm
Weight: 23.5 gram without battery
Size: 80mm*80mm*50mm
SPI ELRS 2.4GHz

Compatible with 1S Lipo battery or Lihv battery 
Battery Plug: PH2.0

Recommend 3.8v LiHV 1S 300mAh LiPo Battery

Flight controller SuperbeeF4 Lite ELRS/FRSKY
SPI ELRS version Firmware target: CrazybeeF4SX1280
MCU:STM32F411CEU6 (100MHz, 512K FLASH)
Sensor: MPU-6000 or ICM20689 or BMI270(SPI connection)
Power supply: 1S Lipo Lihv battery input (DC 2.8V~4.35V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Betaflight OSD(SPI Control)
Built-in SPI Frsky/ExpressLRS receiver
Built-in 5V 1A BEC
Built-in voltage detection

Onboard 4in1 ESC
MCU upgraded to EFM8BB21
Power supply: 1S LiPo/LiPo HV (2.8v~4.35v)
Currents: 5A continuous peak 6A (5 seconds)
Factory firmware: O_H_5_REV16_8.HEX
Default protocol: DSHOT150/DSHOT300/DSHOT600

Onboard SPI ExpressLRS 2.4GHz Receiver
Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz
RF Frequency: 2.4GHz
Antenna plug: IPEX
Telemetry output Power: <12dBm
Receiver protocol:  SPI ExpressLRS
Could bind with ELRS V2.0 firmware TX module

Motor
Mode: EX0802 19000KV
Stator:8mm x 2mm
Shaft Diameter:Φ1mm
Motor Dimension(Dia.*Len):Φ10.5mm*14.9mm
Weight(g):1.7g
No.of Cells(Lipo):1S only

Propeller Gemfan 1219 Bi-blades
Weight:0.19g
Pitch:1 inch
Props Dia:30mm


HDZero Nano Lite Camera
14x16x11mm
1.5gram
0.5 inch, up to 10650 mV/Lux-sec ultra-high sensitive CMos sensor
Fov:
4:3: D:130° H:108° v:84°
16:9:D:122° H:108° V:65°

HDZero Whoop Lite VTX
1S Input
25mW/200mW RF Output-SmartAudio Support
25.5x25.5 M2 Soft Mounting- Antenna Retention
Removable Shielding Box- 32.5x32.5mm(29x29mm inner)


[user]kdrc-kevin-d[/user] Actually, these are not the pro, but excellent modules, even according to some of the leading members of ELRS community.

Most ppl preferred the reassurance of the 1 watt so I decided to continue my mission to rid the world of FrSky and Flysky and gave away all of them at Easter. As a result, I only have the Pro's left atm and my pile of used frsky rx's is getting ready for the blender. 

Check this one, which I use myself for all of my quads: https://fpvexchange.com/bucket/happymodel-elrs-es24tx-pro-micro-tx?item=5ea1a795-0684-4496-8f58-550ff774b5f2

Happymodel ELRS Micro 2.4GHZ ES24TX

Happymodel Moxon 2.4GHz antenna for ExpressLRS TX module SMA plug for ES24TX Series TX

Frequency  (MHz):     2400.0 (2.4 ghz)
Efficiency (dBi):   -2.94
Gain (dBi):    4.18
Efficiency (%):      50.77
Directivity (dB):    7.12
Peak Gain Position (Theta):  0.00
Peak Gain Position (Phi):     270.00
Weight(gram):      5.83
Length(mm)*width(mm):     69*45
Plug type:     SMA
Package include: Happymodel 2.4GHz Moxon antenna x1pcs

Used

Five33 Switchback HD ELRS +caddx nebula pro nano

Hello! So I am looking to my recent build to someone who will Actually use it since I just don't have the time anymore....

a little about this bad boy... I built this To be a top tier high end racing machine with HD video... I have only flown one session with it (about 6 packs in total) and it flys great on stock tune... If you are looking for a pre tuned build this definitely isn't it... it's just default betaflight settings you will have to tune it to your liking.... but if you want one of the best racing quads with HD then this is for you She comes in at a perfect 300g exactly (without battery)

--DIATONE MAMBA MK4 F722 MINI + F40A 3-6S 128KHZ BLHELI_32 FLIGHT CONTROLLER STACK - 20X20MM ($101)

--FIVE33 2207 “Champions Edition” 2070kv Motor w/ MR30 x4 ($96)

--FIVE33 Switchback HD frame kit with arm braces x4 ($70)

im asking $400 but willing to entertain other offers I will pay shipping for free anywhere in US...international shipping will be up to you... if you have any questions at all about this or need more info hit me up and we can chat thanks!

*** pictures are the exact same as it is now minus the camera I had init initially was the nebula pro camera on it but decided to save a few grams and put the nano version on there... still the same great 120fps camera just smaller!***

Happymodel ES24TX 2.4GHz ExpressLRS ELRS Long Range Low Latency High Re-flashed Micro TX Module for RC Drone

** BRAND NEW ** - Axis Flying Manta - Squashed X - 5 inch Freestyle - DJI HD - ELRS 2.4

RCINPower GTS V2 - 2207 Plus - 1860 KV - Pink/Blue

This quad is a new build. Half pack test flight. Looking for a good home. Never crashed. Fully brand new everything. Built by an experienced builder with years of experience. Serious Buyers Only

Hello I live in Austria and I also have a bunch of nano rx´s one diversity and a diamond antenna which I would like to exchange.

Upgrade to ELRS - Exchange Crossfire, Tracer, Ghost, FrSky, FlySky for ELRS gear

If you’re interested in switching your fleet over to ELRS, let me know and I will exchange your old receivers and transmitter modules into ELRS.

I’m still working out pricing, but here is a starting point!

For Spectrum, FrSky and FlySky, please DM for details

https://fpvexchange.com/user/ZenakisFPV?list=f7a07dda-5127-47ce-b5ae-5eae5d5abd6e

Crossfire and Ghost have more value than Tracer and FrSky...but happy to exchange them for you. It’s a loss of a little bit, but it’s about the same as what you paid for it. Antennas, etc, whatever. All accepted. 

You send to me and I mail you modules and receivers that'll work for you. Currently only Happymodel gear. 

Still flying now? Happy to mail in advance to keep you up in the air.

Ideally just to keep everyone’s life simpler, my process is pretty public.  

1) Try to keep the items that you’re trying to buy a similar value of what the reimbursement cost is. That makes it easy when we receive a random package days later.   

2) Select what you want to buy and then include a exchange offer and mention what things you’re going to be trading in for it somewhere in the text of the offer.  

3) For crossfire, I generally do about 70% of what the retail cost is on getfpv or pyro. So you would lose about 30% doing a trade-in versus what you paid for it.   

4) In the meantime, I mail out what you want based upon what you had requested in your original offer. 

5) Just drop everything in the same box that I send you and just mail it back to me within about two weeks. I generally try to go for about the same amount so it keeps things simple for both of us.

ELRS EPW5 2.4GHz 5CH PWM RC receiver

Item: Happymodel EPW5 2.4GHz pwm receiver
ESP8285, SX1280/1281
Antenna connector: IPEX MHF 1/U.FL
5x PWM outputs
RF Frequency: 2.4GHz (2400~2480MHz)
Telemetry power: 12dbm
Receiver protocol: PWM or CRSF
Input voltage: +5V DC @ “+” pad
PCB size: 17mm x 14mm
Weight: 1.1g with antenna
Default firmware version: ExpressLRS v2.0

Firmware:
DIY_2400_RX_PWMP,  PWM receiver via 1~5 PWM outputs
HappyModel_EP_2400_RX,  CRSF Serial receiver via TX and RX
Firmware update via UART or WIFI

Package Included:
1 x Happymodel EPW5 2.4GHz pwm Receiver
2 x 2.4GHz antenna
3 pin 2.54mm

Supply power to the EPW5 RX, wait until the Green LED on the RX is off, immediately turn off the power, and then repeat again the above steps. When the RX is powered on for the third time, the Green LED light will start to double-flash, which means that the RX enters the binding mode

Get into menu of ELRS.LUA V2.0 version from your radio transmitter and then press BIND, the Green LED on the RX module will getting to be solid if bind successfully.

Micro sale - analog builds

#Micro #Micro #emax #Rc #Analog #frsky #elrs

[user]kdrc-kevin-d[/user] I felt the same way when I was deciding to switch from all my crossfire due to having the Tango Pro.  I did and I would never look back. I'm hooked on the ELRs, and next build will be on a wing and I'll be testing the range. Will see how far I can get it out before failsafe.

Happymodel ELRS ES24TX Pro Micro TX

ELRS EP82 VRX-Backpack module

Some of the ExpressLRS TX modules include an additional ESP8285 chip, which lets us communicate wirelessly with other ESP8285 enabled devices using a protocol called espnow. We call this chip the “TX-Backpack”. The aim of the TX-Backpack is to allow wireless communication between ExpressLRS, and other FPV related devices for command and control, or for querying config.

Sounds interesting… What type of FPV devices can it talk to?

A prime use case is your video receiver module (or VRX). Currently there aren’t many VRX modules that have an ESP8285 built in to allow them to communicate with ExpressLRS, so in most cases you need to add your own. A small ESP based receiver can be “piggybacked” onto your VRX module, which allows ExpressLRS to control the band and channel that your goggles are set to. We call this device the “VRX-Backpack”.

Wow cool, so I’ll be able to control the module via ELRS!? Which VRX modules does it work with?

The list of supported modules can be found on the

wiki: https://github.com/ExpressLRS/Backpack/wiki

[user]Jeb23[/user] Yep - only the best =)

Happymodel X12 AIO 5-in-1 Board - F4 FC + 12A ESC

Specifications:
Brand Name: Happymodel
Item Name: X12 AIO 5-IN-1 Flight controller built-in 12A ESC and OPENVTX
Betaflight firmware target:
ELRS Version: CRAZYBEEF4SX1280
FRSKY Version:CRAZYBEEF4FR
PNP Version:CRAZYBEEF4DX
LITE Version:CRAZYBEEF4SX1280
VTX antenna: U.FL
Weight: 5.1g
Support 1-2S Lipo/LIHV battery
Size: 30mm*30mm*8mm

X12 ELRS V2.0 flight controller built-in ELRS 2.4G receiver Target: CRAZYBEEF4SX1280
X12 Frsky V1.0 flight controller built-in FRSKY 2.4G receiver Target: CRAZYBEEF4FR
X12 PNP V1.0 flight controller without onboard receiver Target CRAZYBEEF4DX
X12 LITE V1.0 flight controller built-in ELRS 2.4G receiver Target:CRAZYBEEF4SX1280
MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU6000 or ICM20689 or BMI270(SPI connection)
Mount hole size: 25.5mm*25.5mm
Power supply: 1-2S battery input (DC 2.9V-8.7V)
Built-in 12A(each) Blheli_S 4in1 ESC
Built-in Betaflight OSD(SPI Control)
Built-in 5.8G OpenVTX 0mw~400mw
Built-in ExpressLRS 2.4G,Frsky D8/D16
Built-in voltage meter sensor , voltage meter scale 110Built-in current meter sensor , current meter scale 470

Power supply: 1-2S LiPo/LiPo HV
Current: 12A continuous peak 15A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: Z_H_30_REV16_7.HEX
Default protocol: DSHOT300
Support Bluejay firmware
When use Blujay firmware with 48khz, should set startup power to 1100/1200

ExpressLRS Firmware version: V2.0
RF Frequency: 2.4GHz
Antenna : SMD antenna
Telemetry output Power: <12dBm
Receiver protocol:  SPI ExpressLRS
Compatible with ExpressLRS V2.0 TX Module
Couldn’t flash separately ExpressLRS firmware

iFlight Alpha A85 HD Whoop Quadcopter - 3S HDZero version + Spare motors

Lightly used HDZero 3S version of the iflght Alpha A85.

It looks custom. Could you describe the build, components, condition? Any hard crashes? Bent motors? Etc.