ELRS Backpack install https://elrs.fpvexchange.com

HDZero VRX - HDZero VRX4 - HDZ3500

HDZero VRX mounts to the front of your goggle in the same manner as before using the included fan guard mount. The VRX is compatible with any goggle which supports HDMI input. 

Four SMA jacks allow you to pick the right antennas for your situation. Racing or flying around the house? All omni antennas work well. Outdoor applications benefit from the TrueRC slide on patch antennas which can mount to the front rails or design your own slide on antenna solution (CAD example file will be provided).

The real time clock (RTC) automatically timestamps your DVR recordings to make it easier to review footage.

ELRS Backpack expansion plug makes it easy to add automatic channel switching and other features from Express LRS.

Ambient audio recording captures the sound near you so you can hear lap times called out and pilot commentary.

HDZero Goggle

HDZero Goggle was designed with the FPV community for the FPV community. We asked what you wanted, and we delivered:

Open-source goggle software and CAD files, so you can customize it to your preferences

Clear digital video immune to warping, color shifting, and image rolling

1080p 90hz adaptive refresh rate OLED micro-displays

Resolutions for different flying types: 1080p30, 720p60, 540p90, and 540p60

Smoothest and fastest link for the most connected flying feel (3ms glass-to-glass)

Fly with friends – 1-way broadcast doesn’t interfere with nearby pilots

Improved analog video resolution with real-time deinterlacer

All the video input and output you need – one goggle for digital, analog, and HDMI video

HDMI input and output (yes, it is possible to have both)

Add-on Analog Module Bay with 2.4Ghz Wi-Fi module for future expansion:

Video streaming to phone (possible future capability)

OTA Goggle FW updates (possible future capability)

Mount antennas to innovative rail mount system

On/off sliding switch – be confident that the goggle is on or off at a glance or by feel

Designed for open source, the new goggle runs Linux. All code for the user interface is new and open source

90Hz 1080p OLED screens with sliding IPD adjustment and dials for focus adjustment

By integrating the entire goggle display pipeline with HDZero’s fixed-latency video transmission, these goggles achieve 3ms glass-to-glass sub-frame latency with no jitter or dropped frames

Mounting rails for patch antennas or whatever else you might want to mount

Recessed front SMA jacks so no need to remove antennas when packing the goggle away

Three independently addressable fans work in combination to cool the internals and prevent fogging. They are soft mounted to prevent screen vibration and noise

3.5mm combination headphone / microphone jack for audio and external mic

3.5mm analog video/audio input for use with ground station inputs

Integrated 2D deinterlacer that adds no delay for analog input

6-axis smart inertial measurement for head tracking pan+tilt support

Add-on side-mounted analog module bay that accepts most of today’s analog modules

Add-on 2.4Ghz WiFi video streaming module for live steaming

HDZero Camera glass-to-goggle glass latency: <3ms

Full HD 1920x1080p 90fps OLED micro display

HDZero Mobula6 BNF - 1s HDZero Whoop Lite

HDZero Mobula6 BNF - 1s HDZero Whoop Lite - ELRS version

Specifications:
Frame wheelbase: 65mm
Weight: 23.5 gram without battery
Size: 80mm*80mm*50mm
SPI ELRS 2.4GHz

Compatible with 1S Lipo battery or Lihv battery 
Battery Plug: PH2.0

Recommend 3.8v LiHV 1S 300mAh LiPo Battery

Flight controller SuperbeeF4 Lite ELRS/FRSKY
SPI ELRS version Firmware target: CrazybeeF4SX1280
MCU:STM32F411CEU6 (100MHz, 512K FLASH)
Sensor: MPU-6000 or ICM20689 or BMI270(SPI connection)
Power supply: 1S Lipo Lihv battery input (DC 2.8V~4.35V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Betaflight OSD(SPI Control)
Built-in SPI Frsky/ExpressLRS receiver
Built-in 5V 1A BEC
Built-in voltage detection

Onboard 4in1 ESC
MCU upgraded to EFM8BB21
Power supply: 1S LiPo/LiPo HV (2.8v~4.35v)
Currents: 5A continuous peak 6A (5 seconds)
Factory firmware: O_H_5_REV16_8.HEX
Default protocol: DSHOT150/DSHOT300/DSHOT600

Onboard SPI ExpressLRS 2.4GHz Receiver
Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz
RF Frequency: 2.4GHz
Antenna plug: IPEX
Telemetry output Power: <12dBm
Receiver protocol:  SPI ExpressLRS
Could bind with ELRS V2.0 firmware TX module

Motor
Mode: EX0802 19000KV
Stator:8mm x 2mm
Shaft Diameter:Φ1mm
Motor Dimension(Dia.*Len):Φ10.5mm*14.9mm
Weight(g):1.7g
No.of Cells(Lipo):1S only

Propeller Gemfan 1219 Bi-blades
Weight:0.19g
Pitch:1 inch
Props Dia:30mm


HDZero Nano Lite Camera
14x16x11mm
1.5gram
0.5 inch, up to 10650 mV/Lux-sec ultra-high sensitive CMos sensor
Fov:
4:3: D:130° H:108° v:84°
16:9:D:122° H:108° V:65°

HDZero Whoop Lite VTX
1S Input
25mW/200mW RF Output-SmartAudio Support
25.5x25.5 M2 Soft Mounting- Antenna Retention
Removable Shielding Box- 32.5x32.5mm(29x29mm inner)


HDZERO Race2 VTX and Runcam Nano HDZero - NIB

Both unopened.  Planned a build, but life happened.

Runcam Micro HDZero

Used

[user]raydesheles[/user] Yep. Should be solid builds tho 👍

Hdzero bnf sale

Well, not all micro, but you get the idea :)

HDZero MIPI Cable 120mm

HDZero MIPI Cable 80mm

HDZero MIPI Cable 40mm

HDZero MIPI Cable 250mm

HDZero Scout HD Goggle

Lightly used scout HD Goggle. Works perfect 

HDZero Nano v2 Camera

14×16 mm dimensions (same width as a standard nano camera, and 2mm taller)

I am pleased to announce that Runcam HDZero Nano V2 camera is ready to release. It uses the same CMOS sensor as HDZero Micro V2 camera so that it has better image quality and low light performance. It also adds 4:3 mode and 16:9 (full) mode for wider FOV.

*1: The corners will show black vignettes. 

 2: Micro v2 and Nano lite Cameras supports 16:9 mode with updated firmware.

Here is the detailed review from Daniel English:

https://www.youtube.com/watch?v=NbcK3AHjSqg

Additionally, these products are now purchasable in separate packages:

HDZero XT60 DC Cable

HDZero Mini HDMI Cable

Hdzero micro HD camera

Spare Canopy for Mobula6 HDZERO

Item Name: Camera Canopy for Mobula6 HDZERO

Runcam Nano HD Camera for HDZero

+ $11.95 USPS Priority, or $5 USPS 1st Class.